Stereo Power 8Ω: 800W×2

Stereo Power 4Ω: 1500W×2

Distortion THD+N: <1%<>

Frequency Response (±1dB): 20Hz-20KHz

Signal-to-Noise Ratio (1KHz): 98dB

Input Impedance: Balanced 20KΩ / Unbalanced 10KΩ

Input Connector: XLR Female Socket

Output Connection: NL4MP Plug Socket

Power Requirements: 200-240 VAC (50~60Hz)

Cooling System: Forced cooling with front-to-back airflow and cooling fan

Features: Overvoltage protection, undervoltage protection, over-temperature limiting, over-temperature shutdown, overcurrent limiting, overcurrent shutdown, DC protection, output short circuit protection, temperature-controlled fan, power amplifier frequency synchronization, etc.

Dimensions (W×D×H): 482×375×44mm

Net Weight: 7kg

Technical Specifications:

8Ω Rated Impedance Output Power: 280Wx4

70V Constant Voltage Output Power: 500Wx2

100V Constant Voltage Output Power: 500Wx2

Total Harmonic Distortion (THD): <0.02%

Frequency Response: 10Hz to 20kHz, +/-3dB

Input Impedance: 20k/10k

Input Sensitivity: 0dB

Signal-to-Noise Ratio (20Hz-20kHz, 4Ohms): >100 dB

Channel Separation (1kHz, 4Ohms): >70dB

Damping Factor (10-400Hz, 8Ohms): >300

Output Stage: Class D

Protection: Short circuit, DC output, overheat, overload

Power-On Delay: 3 seconds

Input Connectors: RCA, Euroblock

Output Connectors: Terminal blocks

Product Dimensions (WxDxH): 482X343X44 (MM)

Net Weight: 6kg

Gross Weight: 7.2kg

2-input 4-output digital speaker processor

Utilizes a 24-bit high-end converter coupled with a 96kHz sampling frequency, delivering exceptional audio quality performance.

Features a 2-channel input and 4-channel output perfect mixing matrix loudspeaker processor, offering versatile connectivity and processing options.

Incorporates state-of-the-art DSP processing technology, ensuring high-quality audio signal processing and fine-tuning.

Each input channel is equipped with a 30-band equalization filter and 3 all-pass filters for precision sound adjustment.

Each output channel is outfitted with a 7-band equalization filter to optimize the output signal.

Input and output filters provide a variety of filter types, including Bell, Chebyshev, high/low-pass, band-pass, and notch filters.

Filter frequency range spans from 20Hz to 20kHz, catering to diverse audio adjustment needs.

Optional slope ranges from -6dB/Oct to -48dB/Oct, allowing users to select different filter types based on audio requirements.

Equipped with overflow-limiting processing to ensure audio output remains within acceptable limits.

Each output channel is endowed with a precise dynamic range controller that operates based on the RMS value of the limiting input.

Each input channel offers an adjustable delay time of up to 480ms, while each output channel allows for adjustable delay of up to 270ms, facilitating audio synchronization and alignment.

Offers computer network connectivity options, enabling communication with a computer through USB and RS485 for remote setup, monitoring, and control.

Also provides the capability to use remote PC software to configure, monitor, and control the device, facilitating user management of audio processing and adjustments.

3-Way Embedded Speaker System:

Low-Frequency Driver: 6.5-inch Kevlar cone.

Mid-Frequency Driver: 5-inch polypropylene.

High-Frequency Driver: 1-inch silk dome.

Frequency Response: 60Hz to 20kHz.

Impedance: 8Ω.

Rated Power: 40W; Input Power: 160W.

Nominal Coverage Angle (H×V): 90° × 90°.

Outer Dimensions: Diameter 335mm / Height 150mm.

Mounting Hole Dimensions: Diameter 315mm / Height 145mm.