Low-Frequency Transducer: Utilizing a 6.5-inch Kevlar low-frequency cone driver with a rubber surround.

High-Frequency Transducer: Incorporating a 1-inch aluminum dome tweeter with an EOS waveguide design.

Rated Power: 45W; Maximum Output Power: 175W.

Input Impedance: 8Ω.

Nominal Coverage Angle (H×V): 90° × 90°.

Frequency Response (-3 dB): 60Hz to 20KHz.

Sensitivity: 91dB.

Adjustable Directivity.

Mounting Hole Diameter: 200mm.

Mounting Depth: 110mm.

Technical Specifications:

8Ω Rated Impedance Output Power: 280Wx2

70V Constant Voltage Output Power: 500Wx1

100V Constant Voltage Output Power: 500Wx1

Total Harmonic Distortion (THD): <0.02%

Frequency Response: 10Hz to 20kHz, +/-3dB

Input Impedance: 20k/10k

Input Sensitivity: 0dB

Signal-to-Noise Ratio (20Hz-20kHz, 4Ohms): >100 dB

Channel Separation (1kHz, 4Ohms): >70dB

Damping Factor (10-400Hz, 8Ohms): >300

Output Stage: Class D

Protection: Short circuit, DC output, overheat, overload

Power-On Delay: 3 seconds

Input Connectors: RCA, Euroblock

Output Connectors: Terminal blocks

Product Dimensions (WxDxH): 482X343X44 (MM)

Net Weight: 4.9kg

Gross Weight: 6kg

Technical Specifications:

8Ω Rated Impedance Output Power: 280Wx4

70V Constant Voltage Output Power: 500Wx2

100V Constant Voltage Output Power: 500Wx2

Total Harmonic Distortion (THD): <0.02%

Frequency Response: 10Hz to 20kHz, +/-3dB

Input Impedance: 20k/10k

Input Sensitivity: 0dB

Signal-to-Noise Ratio (20Hz-20kHz, 4Ohms): >100 dB

Channel Separation (1kHz, 4Ohms): >70dB

Damping Factor (10-400Hz, 8Ohms): >300

Output Stage: Class D

Protection: Short circuit, DC output, overheat, overload

Power-On Delay: 3 seconds

Input Connectors: RCA, Euroblock

Output Connectors: Terminal blocks

Product Dimensions (WxDxH): 482X343X44 (MM)

Net Weight: 6kg

Gross Weight: 7.2kg

Coaxial Linear Array Loudspeaker

Custom 3-inch Neodymium High-Frequency Driver

Frequency Response: (±3dB) 130Hz to 16kHz (±3 dB), and (-10dB) 110Hz to 18kHz (-10dB)

Nominal Directivity: (-6dB) 90 degrees horizontal by 10 degrees vertical

Sensitivity (@1W/1m): High-Frequency: 111dB, Low-Frequency: 100dB

Power Handling: High-Frequency: 120W, Low-Frequency: 200W

Impedance: High-Frequency: 16Ω, Low-Frequency: 16Ω

Maximum Sound Pressure Level: High-Frequency: 130dB SPL, 136dB SPL peak

Low-Frequency: 123dB SPL, 129dB SPL peak

Driver Specifications: High-Frequency: 2 x 1.75-inch (1-inch throat) neodymium compression drivers with 44mm voice coils

Low-Frequency: 1 x 8-inch woofer with a 50mm voice coil and ferrite magnet

Enclosure Dimensions (Height × Width × Depth): 265mm × 480mm × 342mm

Net Weight: 16kg

Mounting/Hanging: 3-point suspension, adjustable from 0° to 10°

Connection Sockets: 2 x NL4MP sockets

Connection Method: Low-Frequency: 1 positive (+) and 1 negative (-)

High-Frequency: 2 positive (+) and 2 negative (-)

Materials: 15mm and 18mm multi-layer birch plywood

Enclosure Surface Coating: Polyurethane spray coating

Grille: Steel grille with a transparent acoustically resistive dust cover.