Frequency response: 85Hz ~ 18 KHz (±3 dB)

65Hz ~ 20 KHz (-10dB )

Sensitivity (1W / 1m): 95dB SPL

Nominal impedance: 8Ω

Rated power (AES): 250W

Bass unit: 8 inch 50 core woofer

Tweeter: 1.4 inch (1 inch throat) compression driver (36mm voice coil)

Nominal Coverage Angle (H × V)：80゜ × 80° (rotatable, high-strength die-cast aluminum horn)

Max SPL (dB): 118 (continuous), 125 (peak)

Size (H × W × D)(mm) ：473 × 228 ×257

Weight: 10 kg

Connection socket: NEUTRIK four-core speaker base

Hanging hardware: M8 hanging point + 35mm support base

Connection mode: 1 + 1-

Cabinet material: 15mm; 18mm multilayer plywood

Case surface spraying: spray polyurea on the surface

Covering net:steel net covered with soundproof and dustproof netting

Four-channel DSP professional digital amplifier

● 50 preset storage slots

● High sampling rate of 96KHz

● Customized European digital amplifier module

● Built-in DSP digital processing module

● Ethernet TCP/IP network control port

● 4.3-inch capacitive touchscreen with a resolution of 480x272

● DANTE and AES67 digital audio signal transmission, supports Daisy-Chain and hand-in-hand cascading

● IIR/FIR high/low pass/bandpass electronic crossover, up to 512 taps for FIR filters, 8 windowing algorithms available

● FIR phase compensation and coefficient generation wizard, adjustable FIR latency, supports third-party FIR coefficient import

Channel Count: 4

Analog Inputs: 4 x XLR, Level: +13dB

Digital Inputs: 2 x XLR, 4-channel AES/EBU, 2x RJ-45, 4-channel DANTE

THD @ 90V (1kHz): <1%

Signal-to-Noise Ratio (Dynamic Range): >102 dB (A-weighted, AES-17 Filter)

Frequency Response: 20 Hz - 20 kHz ± 0.5 dB (8Ω load, within 1 dB of rated power), DSP Frequency Response: 20 Hz - 20 KHz, -0.5dBu at 20 Hz and 20 kHz

Maximum Output Power: 4Ω 4 x 950W, 8Ω 4 x 650W; or 70V direct drive

Output Circuit: D-class amplifier module - full-bandwidth PWM modulator, achieving ultra-low distortion

Operating Range: 90-245 VAC (50/60Hz); manual hardware selection of 110/220 VAC available

AC Power Supply: Independent switch-mode power supply

Protection: Overcurrent, over/under voltage, output DC protection, and temperature protection

Low-Frequency Transducer: Utilizing a 6.5-inch Kevlar low-frequency cone driver with a rubber surround.

High-Frequency Transducer: Incorporating a 1-inch aluminum dome tweeter with an EOS waveguide design.

Rated Power: 45W; Maximum Output Power: 175W.

Input Impedance: 8Ω.

Nominal Coverage Angle (H×V): 90° × 90°.

Frequency Response (-3 dB): 60Hz to 20KHz.

Sensitivity: 91dB.

Adjustable Directivity.

Mounting Hole Diameter: 200mm.

Mounting Depth: 110mm.

12 balanced microphone analog inputs, 2 stereo inputs, 8 digital inputs, low noise floor, and adjustable multifunctional parameters.

Built-in USB recording and playback functions, supporting lossless audio formats like APE, MP3, FLAC, WAV; USB sound card supports multi-track recording and playback.

8 DCA groups and 8 mute groups that can be assigned to input, output, and effects channels.

Each input channel features a 6-band parametric EQ, compressor, noise gate, polarity, and delay.

Each output channel features an 8-band parametric EQ, 31-band graphic EQ, high/low-pass filters, limiter, and delay.

Built-in adaptive notch feedback suppression algorithm.

Supports 100 preset scenes, importable via USB storage for backup and recall.

Built-in signal generators for sine wave, white/pink noise.

Unique Link connection feature for binding adjacent channels; panel lock to prevent accidental operation.

Customizable channel names.

Full-function control software available for Windows, Linux, Mac, Android, iOS, and other operating systems.

Inputs: Balanced XLR/TRS combo inputs In112;

Stereo inputs: TRS stereo input jacks for 1316;

Multi-channel USB sound card inputs;

4 channels of Dante signal inputs;

2 channels of S/PDIF digital inputs;

Outputs: LR main bus outputs;

4 AUX auxiliary outputs;

LR monitor outputs;

2 AES/EBU outputs;

Multi-channel USB sound card outputs;

2 channels of S/PDIF digital outputs;

4 channels of Dante outputs.

Total harmonic distortion & noise: <0.002% @ 18dBu A-weighted;

Sampling rate: 48 kHz;

Signal-to-noise ratio: -92 dBu A-weighted;

Screen: 7-inch high-definition touchscreen with 1024×600 resolution;

Frequency response (20~20 kHz): 20 Hz ~ 20 kHz, ±0.2 dB;

Quantization bit depth: 24-bit;

Maximum level (input): +20 dBu, balanced;

Maximum level (output): +20 dBu, balanced;

Phantom power: 48V;

Analog-to-digital dynamic range: 108 dB;

Digital-to-analog dynamic range: 108 dB;

Input impedance (balanced): 20 kΩ;

Output impedance (balanced): 100 Ω;

Channel isolation @1 kHz: 100 dB;

Operating temperature: 0°C to 55°C;

Operating power supply: 220V/50Hz;

Power consumption: 45W.