Four-channel DSP professional digital amplifier
Four-channel DSP professional digital amplifier
● 50 preset storage slots
● High sampling rate of 96KHz
● Customized European digital amplifier module
● Built-in DSP digital processing module
● Ethernet TCP/IP network control port
● 4.3-inch capacitive touchscreen with a resolution of 480x272
● DANTE and AES67 digital audio signal transmission, supports Daisy-Chain and hand-in-hand cascading
● IIR/FIR high/low pass/bandpass electronic crossover, up to 512 taps for FIR filters, 8 windowing algorithms available
● FIR phase compensation and coefficient generation wizard, adjustable FIR latency, supports third-party FIR coefficient import
Channel Count: 4
Analog Inputs: 4 x XLR, Level: +13dB
Digital Inputs: 2 x XLR, 4-channel AES/EBU, 2x RJ-45, 4-channel DANTE
THD @ 90V (1kHz): <1%
Signal-to-Noise Ratio (Dynamic Range): >102 dB (A-weighted, AES-17 Filter)
Frequency Response: 20 Hz - 20 kHz ± 0.5 dB (8Ω load, within 1 dB of rated power), DSP Frequency Response: 20 Hz - 20 KHz, -0.5dBu at 20 Hz and 20 kHz
Maximum Output Power: 4Ω 4 x 950W, 8Ω 4 x 650W; or 70V direct drive
Output Circuit: D-class amplifier module - full-bandwidth PWM modulator, achieving ultra-low distortion
Operating Range: 90-245 VAC (50/60Hz); manual hardware selection of 110/220 VAC available
AC Power Supply: Independent switch-mode power supply
Protection: Overcurrent, over/under voltage, output DC protection, and temperature protection
资料填写中
资料填写中